Hi Folks,
I've been reading where many people are having wind issues this weekend. It's been no different here in Atlanta with 35-40mph gusts. My HD channels on 129 are going in and out from time to time. It's very difficult for me to tell if it's due to a moving dish or if trees are being bent into the signal path. FYI, there are NO monopoles on my dish - just the main mast bolted to the roof. Should I have two monopoles installed for stability? My service was only established about 7 months ago and I've had reception trouble that had to be addressed with with a re-peaking of the dish. FYI, when I'm able to read signal strengths I'm getting 70 on 119 trsp12, 61 on 110 trsp 16, and all over the board on 129 (from high 20s to mid 40s). This is with a 1000.2 dish.
Anyway, upon checking signal strength (menu, then 6-1-1) my 722 froze on the signal lock/strength meter screen. It never displayed the meter screen or sounded the signal strength tone. Instead it kept a small window of live tv open and displayed menu options down the left side of the screen. I could not get back to live tv or any other function. I've tried it three times and each time I've had to reboot the 722. Has anyone had this issue before and is there something going wrong with the unit or the dish setup?
I've been reading where many people are having wind issues this weekend. It's been no different here in Atlanta with 35-40mph gusts. My HD channels on 129 are going in and out from time to time. It's very difficult for me to tell if it's due to a moving dish or if trees are being bent into the signal path. FYI, there are NO monopoles on my dish - just the main mast bolted to the roof. Should I have two monopoles installed for stability? My service was only established about 7 months ago and I've had reception trouble that had to be addressed with with a re-peaking of the dish. FYI, when I'm able to read signal strengths I'm getting 70 on 119 trsp12, 61 on 110 trsp 16, and all over the board on 129 (from high 20s to mid 40s). This is with a 1000.2 dish.
Anyway, upon checking signal strength (menu, then 6-1-1) my 722 froze on the signal lock/strength meter screen. It never displayed the meter screen or sounded the signal strength tone. Instead it kept a small window of live tv open and displayed menu options down the left side of the screen. I could not get back to live tv or any other function. I've tried it three times and each time I've had to reboot the 722. Has anyone had this issue before and is there something going wrong with the unit or the dish setup?