Man it is great to find forums like this.
I have a problem that I can't seem to solve.
We recently moved our existing Dish500 recievers to the kids rooms and had a Dish 1000 system installed with VIP622 in the living room and a VIP211 for our bedroom.
We had a Humax 80 Series 2 tivo that we kept in our bedroom to record. Problem is that the VIP211 has our local channels numbered as 011-00 for example. Obviously, the dish remote can access these channels by pressing 11. But the Tivo tries to enter them in as 011 and the 211 stays on the same channel it was on. All other channels work as normal. This appears to only happen with the local channels on dish. Not the channels above 100. (Which do not have the -00 on them)
Is there anything I can do to fix this. For now, we have the 211 autotuning to those recordings. But that is such a pain.
I have a problem that I can't seem to solve.
We recently moved our existing Dish500 recievers to the kids rooms and had a Dish 1000 system installed with VIP622 in the living room and a VIP211 for our bedroom.
We had a Humax 80 Series 2 tivo that we kept in our bedroom to record. Problem is that the VIP211 has our local channels numbered as 011-00 for example. Obviously, the dish remote can access these channels by pressing 11. But the Tivo tries to enter them in as 011 and the 211 stays on the same channel it was on. All other channels work as normal. This appears to only happen with the local channels on dish. Not the channels above 100. (Which do not have the -00 on them)
Is there anything I can do to fix this. For now, we have the 211 autotuning to those recordings. But that is such a pain.