Dish Network 21.0 Learning Remote Instructions
- Thread starter Scott Greczkowski
- Start date
- Latest activity Latest activity:
- Replies 256
- Views 102K
Yep. Been there, doing that. We got over a foot of snow Thursday night and several more inches last night as well as high winds blowing all that winter wonderland around.See what yer missing out there in sunny CA.
Ed
Wait just one minute, I had the exact same as you, but no wind, today it warmed up to 32 and it is melting the snow fast.
Dan
Yep. Been there, doing that. We got over a foot of snow Thursday night and several more inches last night as well as high winds blowing all that winter wonderland around.
As mentioned in another thread, Truckee, California gets more snow than anywhere else... period. Here is in one of the lighter years:
The list on the tech portal does not list a code for my tv, the 21.0 instructions show my tv, but the codes are pages down and are not connected to any brands.
Dan
Did you go to the link you quoted? Here are the frame contents broken out to a separate page: Tech Portal : Remotes : Remote Codes
Every brand listed has at least 1 code on the same line.
Every brand listed has at least 1 code on the same line.
I was getting a 404 error, but now it comes up and lists my tv. I wonder if I program a code if it will kill all my learned functions for the tv?
It doesn't have the remote codes, but if you go to the tech portal there is a pdf file with instructions on programming the 21.0 remote for all the different things it can do. If I remember right it was under Training > Weekly UpTraining > 2008 > 222k Launch. It is actually just a pdf file of the chapter in the manual about the remote (Hence missing the codes from the back of the book), but goes into alot more detail.
As mentioned in another thread, Truckee, California gets more snow than anywhere else... period. Here is in one of the lighter years:
WOW! Guess I'll stay in sunny Michigan!
Ed
I have updated the PDF file with much easier to read Remote Codes.
Feel free to re download the PDF file located at post #1
Enjoy and Merry Christmas from SatelliteGuys!
Feel free to re download the PDF file located at post #1
Enjoy and Merry Christmas from SatelliteGuys!
I have updated the PDF file with much easier to read Remote Codes.
Feel free to re download the PDF file located at post #1
Enjoy and Merry Christmas from SatelliteGuys!
Perfect! Thanks, Scott, and Merry Christmas to you and P.G., also.
Brad
I have updated the PDF file with much easier to read Remote Codes.
I used the link from Bobabird above on page 3. I highlighted everything and imported into a Word doc. Then deleted everything but my three devices. Now, all on one page.
I'm asking, "Will this remote do it?" Not how to do it. It was implied by someone who has one that it has to be run IR or UHF and not both simultaneously.
Oh, generally Dish Network UHF remotes only do UHF for the Dish Network receiver - all other devices (TV, A/V receiver, VCR) are only controlled by IR.
Controlling TV1 by UHF takes some complicated - yet not particularly difficult - setup, hence the referral to the appropriate thread for that.
PS I have not yet received my own 21.0 remote, so I have no way to verify any specific characteristic of that particular remote.
Controlling TV1 by UHF takes some complicated - yet not particularly difficult - setup, hence the referral to the appropriate thread for that.
PS I have not yet received my own 21.0 remote, so I have no way to verify any specific characteristic of that particular remote.
Actually....most, of the remotes send out IR and UHF at the same time.
The picture of the new one, however, shows a manual slider switch under the battery cover.
That's probably a sign that it is either/or.
Your right, the 6.3 remote has a switch under the battery cover beside the batteries, the 21.0 has the switch under the batteries, so it is not seen when batteries are in place.
Dan
