That was the plan when the SuperDish first came out. But that plan didn't last long at all.
811 is driving me nuts!
- Thread starter dish96
- Start date
- Latest activity Latest activity:
- Replies 24
- Views 3K
When I was in the Toledo, OH market I was using a SuperDISH to do 110/119/121, with 121 containing my locals.
When I wanted to upgrade to HD, I eBay'ed an 811, and then I pointed an old single dish at 61.5. I disconnected the 121 feed from the DP34 switch and replaced it with 61.5. I lost my locals, but it didn't matter because I was picking these up OTA.
If you decide to just buy a 211 and want to go the DIY route, it's not that hard to do what I did if you don't mind loosing locals. You could also replace the switch with one that has 4 inputs to get all 4.
Or, just call DISH and let them do it.
When I wanted to upgrade to HD, I eBay'ed an 811, and then I pointed an old single dish at 61.5. I disconnected the 121 feed from the DP34 switch and replaced it with 61.5. I lost my locals, but it didn't matter because I was picking these up OTA.
If you decide to just buy a 211 and want to go the DIY route, it's not that hard to do what I did if you don't mind loosing locals. You could also replace the switch with one that has 4 inputs to get all 4.
Or, just call DISH and let them do it.
They thrill me to no end. Especailly when they expect us to use them as QAM receivers.
