Running a Hopper 3, which is programmed to record GMA when it is first aired by the local ABC affiliate at 4AM, west coast time (7AM 'real time' in New York). Two anomalies noticed over the past few months, the second one seen first time today on playback.
- First, there are occasional periods of black screen, no picture no sound, which seems to be recorded that way by the Hopper. If it were a satellite signal loss, I'd expect to see the Hopper put a lost signal notification on the screen, but the screen just remains black. I can fast-forward through the outage and the program picks up after a few seconds to maybe a minute. This happens only a few times a month, no big deal.
- But today, something really strange came up on playback. Sound was recorded just fine, no gaps, stuttering or artifacts, but the picture was a series of 'stills,' single frames that would update every couple of minutes. This occurred during the entire hour+ of recorded program time, including the 2 minutes before GMA started, and 2 minutes after GMA ended. Again, I'd expect a 'having difficulties' slide on the screen if this were actually broadcast this way, either from the ABC network or from Dish.