Winegard for possible rescue

Status
Please reply by conversation.
Hello Jason and Long Gunman for this information.
Long Gunman I don't think I can move a dish out here in California this way is all freeway and busy streets , which I could, I will take it apart like Jason did his dish.
Thanks again for this information.
Regards.
Tunder
 
Rt 460 East to get my first dish here was about 15 miles of 4 lane dual highway and I did run the 60 MPH speed limit with that dish on that trailer. But yeah, Mexipornya is probably a much different animal than what I have to deal with here in Virginia! :oldwink
 
  • Like
Reactions: bigg t
I've driven with 10-12 foot similar set-up as Lone Gunman here in Northern California. Hauled upright with mount lashed to trailer sides, keeping everything inside the lanes. Not even a second look while on side roads and I-80 with no problems. Transport during off-peak hours and minimize travel through heavy traffic areas.
 
ImageUploadedBySatelliteGuys1486528603.141051.jpg
. Ten ft on a 180 mile round trip, with polar mount.
 
Hello Jason
Regarding the colors that you use to paint the dish, is this Duplicolor Machinery Gray (DA-1612) a flat paint, I looked it up and was not able to find the details, out here is only sold at the auto parts stores for some reason, I like the colors.
Please let me know.
Thanks in Advance.
Regards.
Tunder
 
I'd call the Machinery Gray a semi-flat paint. Bought mine from O'Reilly Auto Parts.

The paint seems to be holding up to weather - The panels are all outside and it's coming up on a year since I painted the parts
 
Hello Jason
I was able to find this paint out here, I painted the mount with it and it has a little shine on it , Just wonder if this paint will interfere with the signal quality.
Any Information would be appreciated.
Regards.
Tunder
 
Below is what I came up with after painting.
97897-a682c561c4c9a914c88d45e9547d0bed.jpg

On the flat surfaces, there is a bit of shine but not overly glossy. The sheen was very similar to the unexposed areas on the backside of the dish I recovered. There isn't the sheen on the mesh portions as compared to the flat surfaces.

Someone please correct me (I'd like to know too), but I don't foresee an issue with the overall finish of the dish with this sheen.
 
Status
Please reply by conversation.

UHD Video Card

How much would this be worth?

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 3)