what do i need to get all channels on Dish
- Thread starter rick12
- Start date
- Latest activity Latest activity:
- Replies 54
- Views 8K
A dish 500 means a 20" dish designed to receive a signal from the 110 & 119 satellites. The DISH 500 can have either Legacy or DISH PRO electronics on it. Your receivers are LEGACY receivers so you want Legacy electronics on a DISH 500. Your receivers will work with DISH PRO electronics but you will need a DISH PRO ADAPTER for each receiver at $70 each. http://www.switchinfo.info/index.htm will help you out I think.
MarkG
Yes the DP stands for DishPro. A quick way to tell if a E* receiver is DishPro compatible is to check the model number. If it is 3 digits long (eg. 301, 721, 811 etc.) it's DishPro if it is 4 digits long (eg, 5000, 4700, 7200 etc.) it is a legacy receiver.
DishPro receivers will work with any Dish Network LNB/Switch, Legacy or DishPro.
Legacy receivers will work with Legacy LNB/Switches natively. They can be made to work with DishPro LNB/Switches with the use of DishPro/Legacy adapters ~$70 each, or by using a DPP44 Switch.
Yes the DP stands for DishPro. A quick way to tell if a E* receiver is DishPro compatible is to check the model number. If it is 3 digits long (eg. 301, 721, 811 etc.) it's DishPro if it is 4 digits long (eg, 5000, 4700, 7200 etc.) it is a legacy receiver.
DishPro receivers will work with any Dish Network LNB/Switch, Legacy or DishPro.
Legacy receivers will work with Legacy LNB/Switches natively. They can be made to work with DishPro LNB/Switches with the use of DishPro/Legacy adapters ~$70 each, or by using a DPP44 Switch.
DISH's current production is DISH PRO products, Legacy is still being supported but at some time in the future will no longer be supported.MarkG said:
MarkG said:
DishPro is a little more user friendly when it comes to more than the 2 satellites. If you are hooking up 3 satellites (110, 119 and 61.5 or 148), with DishPro its 3 lines to the switch...With Legacy its 6 lines
DishPro is a newer, more capable technology. Cable runs can be up to 200' vs. 100' for legacy. Easier connectivity between LNBs and Switches (1 cable per sat location vs. 2 per sat location for legacy). Easier connectivity for multiple receivers using DPP44 and/or DP34 switches (daisy chain up to 3 switches together for up to 12 receivers vs. interconnecting a maximum of 2 SW64 switches using satellite rated splitters and current passing or blocking {I don't remember witch} connectors)
If yours will be a new setup using all DishPro receivers then I would definitely go with the DishPro LNB/Splitters. If you will be using any legacy receivers or if you currently have a legacy LNB/Splitter setup the question becomes more complicated. There will be a cost/benefit trade off to upgrading to DishPro that will be determined by your exact situation.
If yours will be a new setup using all DishPro receivers then I would definitely go with the DishPro LNB/Splitters. If you will be using any legacy receivers or if you currently have a legacy LNB/Splitter setup the question becomes more complicated. There will be a cost/benefit trade off to upgrading to DishPro that will be determined by your exact situation.
K R: I assume you are referring to the DPP Separator when you say "Splitter".
Note that a DP Splitter is a different device for a different purpose.
It's best to not confuse such things.
Note that a DP Splitter is a different device for a different purpose.
It's best to not confuse such things.
GRRRRRRRRRRRRR!!!!!!!!!!!!!!!!!
*beats self over head with whiffleball bat while chanting*
DishPro Plus Separator!
DishPro Plus Separator!
DishPro Plus Separator!
*puts down whiffleball bat*
I hate it when people don't use the correct terminology!!
Yes Simon I did mean the DPP Separator.
*picking up the bat again*
BAD Kent!
BAD Kent!
*puts down the bat again*
I'm better now.
I did get it right in this thread before I saw this your post here. Does that count for something?
*beats self over head with whiffleball bat while chanting*
DishPro Plus Separator!
DishPro Plus Separator!
DishPro Plus Separator!
*puts down whiffleball bat*
I hate it when people don't use the correct terminology!!
Yes Simon I did mean the DPP Separator.
*picking up the bat again*
BAD Kent!
BAD Kent!
*puts down the bat again*
I'm better now.
I did get it right in this thread before I saw this your post here. Does that count for something?
I have just had a new Dish Network system put in and i was wondering what i needed so i could take 1 of my receivers to my lake house ?
Welcome Tommypic, Get another dish with lnb's(maybe check e-bay) and get enough rg6 cable to reach.
On the new dish's it has dish 500 , if that says anything
i just dont want to get the wrong thing an i know all of you KNOW this sat stuff
Tommy
i just dont want to get the wrong thing an i know all of you KNOW this sat stuff
Tommy
Well, DishPro stuff has a big "DP" logo on it. Use the Check Switch screen on the receiver and see what it says. Post that back and we can tell you what to buy so that moving your receiver will be painless.
The issue is that is the two setups are not the same, you have to run Check Switch EVERY time you move the stuff - and worse, if one setup is DP and the other is not, you have to reset the box's switch matrix to avoid burning out the Legacy LNBFs due to the voltage differences between the 2 systems. It doesn't happen a lot, but we're just going to avoid the whole problem.
The issue is that is the two setups are not the same, you have to run Check Switch EVERY time you move the stuff - and worse, if one setup is DP and the other is not, you have to reset the box's switch matrix to avoid burning out the Legacy LNBFs due to the voltage differences between the 2 systems. It doesn't happen a lot, but we're just going to avoid the whole problem.
