univeral lnbf

[mr.crane]

will universal lnbf work on all ku band satellites, like 97 west etc.

 

[Gary Z]

Yes it will... you have to set it up in your receiver for Universal, I have one but it is not as fast locking on the signal as my standard is.. but it will work.

See Icebergs post on the settings

http://www.satelliteguys.us/free-air-fta-discussion/66143-tip-iceberg.html#post566448

 

[mr.crane]

Yes it will... you have to set it up in your receiver for Universal, I have one but it is not as fast locking on the signal as my standard is.. but it will work.

See Icebergs post on the settings

http://www.satelliteguys.us/free-air-fta-discussion/66143-tip-iceberg.html#post566448

invacom quad says it is universal, but read a post by Iceberg, said only pas9 uses universal, what frequencey is a universal

 

[Anole]

Universal LNBs will operate on lower satellite frequencies than Standard.
Here in North America, we use only Standard (the high end of the FSS band).
A few satellites intended for other areas (which we can receive) may use the lower frequencies of the Universal.

All Invacom LNBs I've seen, are made for Europe, and are Universal.
The only exception I know of is the quad QPH-031, which is designed especially for the North American market.
It has two Standard outputs, and two Circular outputs.

The Invacom web site has PDF documents on all their products.
So if there is still any confusion, please give the model number or web page, and we'll clarify the mumbo-jumbo.


edit: oops, looks like GaryZ and I both quoted the same page from The Tip of the Iceberg.

 

[mr.crane]

thnks aloe, for clarification