Tv Broadcast signal`s

first want to see if I can pick up / receive a radio signal.
Here is a chart of our US VHF-Low Channels:

US TV Freq VHF-Low_2.png


This scan, using an RTL-SDR V3 dongle and GitHub RTLSDR Scanner software, shows the channel 3 Pilot Carrier:
 

Attachments

  • CH3 Test 8-9-2020 No2b_1.png
    CH3 Test 8-9-2020 No2b_1.png
    249.2 KB · Views: 18
As N5XZS mentioned in post #24, the rabbitears.info site can be very helpful in finding US VHF-Low channels. Start with this page first:

Allocation Map for Channel​

https://www.rabbitears.info/allocationmap.php

For all channel 2 allocations, fill it out like this, and click on Go:

johanSatGuysAllocationMap1_1.png


The result should look like this:

johanSatGuysAllocationMap2_1.png


If you click on WLBZ and then Technical Data, you should see this:
 

Attachments

  • johanSatGuys-WLBZinfo_1.png
    johanSatGuys-WLBZinfo_1.png
    122.1 KB · Views: 14
The RTL-SDR V3 dongle SDR is available here (the V4 doesn't work with the Scanner):
Buy RTL-SDR Dongles (RTL2832U)

The RTLSDR Scanner software is available here:
Releases · EarToEarOak/RTLSDR-Scanner

I use version 1.3.0

johanSatGuys-ScannerSW_1.jpg


There is a short tutorial by Pete Higgins:
OTA Signal Analyzers, Meters, Aimers, Bench Gear...

It took me 3 training sessions to learn how to use the Scanner software. If you also find it difficult to learn the Scanner software, you can use SDR# (SDRSharp) software instead with the V3 SDR. It will only show a little more than 2 MHz of the 6 MHz TV channel, but that is enough to show the low end of the channel to see the Pilot Carrier and estimate the SNR.
 

Attachments

  • CH3 Test 8-9-2020 No1_2.jpg
    CH3 Test 8-9-2020 No1_2.jpg
    71.5 KB · Views: 11
  • CH3 Test 8-15-2020 VyWeakSig3.jpg
    CH3 Test 8-15-2020 VyWeakSig3.jpg
    69.4 KB · Views: 12
There is one slight possibility is by E-skip or F2 Ionosphere skips conditions instead of troposphere ducting conditions.

We use VHF-low for various Full power and low power stations using ATSC 1.0 "8VSB modulation" and 3.0 "COFDM or OFDM modulation"

Via, E-skip and F2 skip over Atlantic Ocean to Europe is possible but not tropo ducting.

You may have to use VHF-low band TV antenna " 54 to 88 MHz range "

It will take time and patience to TV DXing but reward will be great.

Be aware we use 60 Hz with higher video framerates in 30i, 30p, 60p, and future 120p for ATSC 3.0.

Video resolution are, 480i, 480p, 720p, 1080i, for ATSC 1.0 and 480p, 730p 1080p and 2160p for ATSC 3.0.

Note: 2160p and 120 FPs are not quite put to use yet but will come soon in the future for our new ATSC 3.0 system. :) :hatsoff

I hope I don't get too technical for you, but we do have rich video flavors.
I hope they don't charge for ota 3.0
 
Top information members . I found someone here in the Netherlands who specializes in building Yagi antennas. Suppose he has questions, I ask them here. Mvg
 
  • Like
Reactions: rabbit73
Top