I'll be getting the HD/TIVO when it comes out so I have what is probably a simple question for the people here. Currently I have an oval dish with the 2 LNB's and the open 3rd slot for SAT C. One line goes into the house cabling and I strung a second into the attic to reach my bedroom. (don't ask, some BS about the cabling in the house only supporting 1 connection.)
I will have the HD/TIVO in the loft and the old Directv/Tivo in the bedroom. Right now I only have 1 run to the loft, and 1 run (totally separate, up the wall of the house, through the attic, then down to the bedroom) in the bedroom. My question is:
What do I need to get 2 runs to each room (loft and bedroom) so that both TIVO's will be able to record 2 shows. Will a simple 4 way (1in-4out) splitter (in the attic) do the job or is a multi-switch (also in the attic) needed with a 2nd run from the satellite into the attic to the switch? I cannot hook up to the initial run that goes to the loft, as the house wiring is strange. I figure at worst I'll have to run another line from the satellite to the attic, but I'm hoping I can just split that 1 run into 4 (probably will need an amplifier?) and take 2 into each room.
Thanks
I will have the HD/TIVO in the loft and the old Directv/Tivo in the bedroom. Right now I only have 1 run to the loft, and 1 run (totally separate, up the wall of the house, through the attic, then down to the bedroom) in the bedroom. My question is:
What do I need to get 2 runs to each room (loft and bedroom) so that both TIVO's will be able to record 2 shows. Will a simple 4 way (1in-4out) splitter (in the attic) do the job or is a multi-switch (also in the attic) needed with a 2nd run from the satellite into the attic to the switch? I cannot hook up to the initial run that goes to the loft, as the house wiring is strange. I figure at worst I'll have to run another line from the satellite to the attic, but I'm hoping I can just split that 1 run into 4 (probably will need an amplifier?) and take 2 into each room.
Thanks