signal beeping sound?

[ESA1178]

On my prior receiver there was a beep sound indicating strength of signal.
I don't have that sound on the Micro HD.
Is there one?

Mark

 

[Mr Tony]

should be
hit the signal button (up on top) to show the full screen signal meter
red button should have the tone

 

[richyrich]

On my prior receiver there was a beep sound indicating strength of signal.
I don't have that sound on the Micro HD.
Is there one?

Mark

must have
In Menu -> System setup -> other -> Tone <on>

And when u press the button "signal" on remote; red button on/off

And it will make a sound in motor/switch program mode; mute

Menu -> Installation -> Antenna setup -> motor/switch setting -> or whatever//Sat tp lnbf lo 22khz diseq 1/2 motor type motor position east/west buttons

mute of remote turns off and on annoying tone; but it will restart and make tone automatically too; but muting works for 15 secs....

 

[ESA1178]

Thanks Richyrich..

That did it..

Mark

 

[SatelliteAV]

must have
In Menu -> System setup -> other -> Tone <on>

And when u press the button "signal" on remote; red button on/off

And it will make a sound in motor/switch program mode; mute

Menu -> Installation -> Antenna setup -> motor/switch setting -> or whatever//Sat tp lnbf lo 22khz diseq 1/2 motor type motor position east/west buttons

mute of remote turns off and on annoying tone; but it will restart and make tone automatically too; but muting works for 15 secs....

It is not necessary to turn the tone on on to use the RED key in the full screen signal meter.