Just another story for you all.
Called to reactivate my old 6000 receiver (inactive since Voom began) to add just the hd pak and the voom hd pak.
Within 10 minutes, and two csr's, I was activated and my monthly charge would be $19.95 (includes $5 service fee for not having any other paks) plus $25 reactivation fee.
All Voom channels are happening now but I only get sound, no picture on the older hd pak.
68 minutes with advanced tech support and no solution, although I was refreshed, soft booted, hard booted. All 3 sats come in fine except for the older hd pak.
Now we know that the hd pak needs the 8psk modulator, which I have had installed from day 1.
The tech concluded that I have either a defective 6000 receiver or defective module, although both were working fine when I put the 6000 in mothballs.
I could get a replacement 6000 for $19.95 + shipping (and return my unit at my expense), or I could add the Dish Protection Plan to my account for $5.95/month (can be cancelled at any time) and he would send me a replacement 6000 plus a replacement module for free, including shipping, with free return shipping labels for the older unit. Great offer and they should be here on Wednesday.
I think the problem really lies in the fact that I have the old blue smart card in my 6000 and the new ones are yellow.
Anyway I hope this takes care of the problem.
*************
On another note, I hooked up my 24" Voom dish and got a 84 signal strength reading. I was just trying to see if it would work, and it did following a switch check.
I then hooked up my original coax cables with the 18" Dish 300 pointing at 61.5 and got a signal strength reading of 104. The 18" dish must be really zeroed in on the sat while the larger 24" Voom dish may be a bit off.
Shelly, down to just 4 working dishes now
Called to reactivate my old 6000 receiver (inactive since Voom began) to add just the hd pak and the voom hd pak.
Within 10 minutes, and two csr's, I was activated and my monthly charge would be $19.95 (includes $5 service fee for not having any other paks) plus $25 reactivation fee.
All Voom channels are happening now but I only get sound, no picture on the older hd pak.
68 minutes with advanced tech support and no solution, although I was refreshed, soft booted, hard booted. All 3 sats come in fine except for the older hd pak.
Now we know that the hd pak needs the 8psk modulator, which I have had installed from day 1.
The tech concluded that I have either a defective 6000 receiver or defective module, although both were working fine when I put the 6000 in mothballs.
I could get a replacement 6000 for $19.95 + shipping (and return my unit at my expense), or I could add the Dish Protection Plan to my account for $5.95/month (can be cancelled at any time) and he would send me a replacement 6000 plus a replacement module for free, including shipping, with free return shipping labels for the older unit. Great offer and they should be here on Wednesday.
I think the problem really lies in the fact that I have the old blue smart card in my 6000 and the new ones are yellow.
Anyway I hope this takes care of the problem.
*************
On another note, I hooked up my 24" Voom dish and got a 84 signal strength reading. I was just trying to see if it would work, and it did following a switch check.
I then hooked up my original coax cables with the 18" Dish 300 pointing at 61.5 and got a signal strength reading of 104. The 18" dish must be really zeroed in on the sat while the larger 24" Voom dish may be a bit off.
Shelly, down to just 4 working dishes now