Newbie first post on hookup

[orezok]

I currently have a DP Plus LNB connected to a 301 (on one RG6 feed) and a 322 through a diplexer on a separate feed. I want to add a 508 at the 322 location (and keep the 322 operational), but can't figure out the proper wiring. I've searched the forums, no joy. Can anyone provide suggestions?

 

[Poke]

Welcome To The Best Satellite WebSite On The Net.. Hmm Im not for sure on that but maybe IceBerg or someone will know.

 

[ndyclrk]

You're going to need a DPP44 and two more cable runs to the 508.

 

[sksatellite]

I currently have a DP Plus LNB connected to a 301 (on one RG6 feed) and a 322 through a diplexer on a separate feed. I want to add a 508 at the 322 location (and keep the 322 operational), but can't figure out the proper wiring. I've searched the forums, no joy. Can anyone provide suggestions?

you should supply a little more information on the setting, you may able to use seperator but got to you your current setting.

 

[boba]

I currently have a DP Plus LNB connected to a 301 (on one RG6 feed) and a 322 through a diplexer on a separate feed. I want to add a 508 at the 322 location (and keep the 322 operational), but can't figure out the proper wiring. I've searched the forums, no joy. Can anyone provide suggestions?

That isn"t a diplexer it is a separator your system is maxed out. If you want a DVR you should replace the 322 with a 625. You can add a $150 DPP44 to your system and drop 1 more cable to the 322 location if you need 3 tuners at that TV

 

[orezok]

Orezok - Thanks. Is there a possible simpler solution such as:
I ran 4 - RG6's from the dish to the 322 location when I built the house. Could I change the LNB to a quad (I have one) and just use 3 separate cables at that location (4th one to the 301 in a separate room? I also have a DP34 (came from my old house) if it will fit in the mix.