Need Help please

[Playactionpass]

I have a dish 500 and a 300. I need the 61.5,119,110 signals. Do I have to have 2 seperate dishes to get these signals? Will a dishpro twin dual plug into the switch or do I need 2 singles dishpro lnbs to plug into switch. I currently have 1 dishpro lnb. I tried to hook 2 legacy lnbs up to a 34 switch at first but then I read that legacy wouldn't work with DP. What do I need to do? Thanks btw I also have an 811 and 508 if this matters.

 

[NightRyder]

Yes you have to have 2 separate dishes. The 500 is for 119 and 110, use the 300 for 61.5. For the dish 300 a DP Single lnbf will work fine.

http://www.dishstore.net/product_info.php?cPath=40&products_id=41


NightRyder

 

[NightRyder]

BTW - Welcome to Satellite Guys Playactionpass!


NightRyder

 

[Playactionpass]

Another question

Ok I do have 2 dishes. The 300 has a single dp lnb and I am picking up 61.5. Will a dishpro twin dual (with built in switch as I understand) plug into the switch or do I need 2 singles dishpro lnbs to plug into the 34 switch from the 500.

I guess I am confused because the twin has a built in switch so you would be sending the 119 and 110 into the 34 switch on the same line. I am thinking only one signal for each input which would mean I need a 2 singles. I am new to this so please understand. Thanks for the help.

 

[NightRyder]

Yes you can plug the Twin into the DP34, there should be 2 lines comming from the twin (one for 119 and one for 110). In this configuration the switch part of the Twin is disabled.

This may help.

http://www.dbstalk.com/showthread.php?t=30114


NightRyder

 

[Playactionpass]

Thats got it.

That is a very useful link. Appreciate the help.