I am having an issue with getting this system up and running, the receiver is from Our regular home subscription which is about 70 miles away. It is a H24/200 receiver. The dish is a Slimline-3, and the SWM's model number is SL3S4R2-01, there is a SUP-2400 B Band converter installed.
I have aimed the dish and I am receiving a 95% signal on tuner 1 from Sat 101. When I go to system installation/setup. I receive a "SWM Registration" error. When I select detect SWM I receive a "can not detect SWM" error.
I called Direct TV Support and they say I need to have a proffesional installer to set it up. Before I do this I want to make sure there is no secret code you punch into the remote to register the SWM to the reciever, or something else that is proprietory to an installer.
I have had this system working using a SL5S4NR2-03 SWM but were receiving half the subscribed channels and no locals. When the Installer activated this newer type of reciever at our home, everything was working fine. I aquired a SL3S4R2-01 SWM because it is the same one as our home has.
Any help would be appreciated.
I have aimed the dish and I am receiving a 95% signal on tuner 1 from Sat 101. When I go to system installation/setup. I receive a "SWM Registration" error. When I select detect SWM I receive a "can not detect SWM" error.
I called Direct TV Support and they say I need to have a proffesional installer to set it up. Before I do this I want to make sure there is no secret code you punch into the remote to register the SWM to the reciever, or something else that is proprietory to an installer.
I have had this system working using a SL5S4NR2-03 SWM but were receiving half the subscribed channels and no locals. When the Installer activated this newer type of reciever at our home, everything was working fine. I aquired a SL3S4R2-01 SWM because it is the same one as our home has.
Any help would be appreciated.