How to use USALS on Invacom QPolar

[weighman]

How do I use the USALS to move the motor on the Invacom Quad Polar? I have set things up fine on the linear side, but if I want to use the circular and move the dish, how do I wire this up so both L and C move the dish???

 

[qwert1515]

What receiver are you using?

You should connect you receiver to your motor then to your switch and finally to your LNBs.

 

[brentb636]

As Qwert said, cable from your receiver to the motor FIRST. Then from the motor lnbf input to a Diseqc switch or a 22khz switch. Then cable from 2 inputs of the switch to an L output and a C output of the Invacom lnbf. That's the long way of saying it, I know .

 

[weighman]

Quad Polar and Motor

Thanks guys.

I set it up and it works great!


I get all sats between 91 and 148 now. Im in an apartment building so I cant get and LOS past these points. But its working grrrrrreat!

 

[Arunta419]

Interesting....

Would this be the same wiring hierarchy if using a C-band motor/mount, Primestar 1m, fitted with the Invacom 031 CLCL LNB.....driving with a V-Box?

 

[brentb636]

Generally, but the vbox must be after the receiver to control the motor seperately. See diagram in this link,
Moteck Digipower V-Box II DisEqC 1.2 POSITIONER VBOX VBOXII .