Eastern NC: My antenna install

brice52

SatelliteGuys Family
Original poster
Pub Member / Supporter
Feb 23, 2018
53
41
Wallace NC
I just got my 30 ft tower up and running with ant751r antenna pointed at magnetic 64 degrees

I have 200 ft of rg6 with antennas direct DP 019 preamp

I n the utility room I have the power inserter and a signal distribution amplifier

these are the midmorning signal

these are from The Dish Hopper OTA sectiom
Wilmington
WWAY Strong 100 WECT Strong 100 WSFX Strong 100 WUNJ Strong 100 ....... these are at all times

Greenville

WITN ok to weak 68 to 82 WCTI OK to Strong 85 to 100 WPXU Ok to Strong 88 to 100 WNCT OK to Strong 82 to 100

Weather affeccts the Greenville reception

It was last year received WITN at 100 as with WCTI WPXU was 82 to 94 WNCT 100

Out of Wilmington WWAY 100 WECT 100 WSFX 82 to 94

Overall with the exception of WITN I have more stable reception with the system I now have
 
  • Like
Reactions: k.r. and FTA4PA
update on reception


Wilmington the same

Greenville
WNCT in poor range on Rabbitear report is locked in Strong
WCTI in Fair range is locked in Strong
WPXU in fair range is locked in Strong

WITN in fair range, weak to OK

WYDO in fair range, weak to no signal

WNUM is good range but I can not pull it in
 
update on reception


Wilmington the same

Greenville
WNCT in poor range on Rabbitear report is locked in Strong
WCTI in Fair range is locked in Strong
WPXU in fair range is locked in Strong

WITN in fair range, weak to OK

WYDO in fair range, weak to no signal

WNUM is good range but I can not pull it in
got new preamp system installed yesterday surely makes a difference

WYDO and WITN are now full signal
 
  • Like
Reactions: FTA4PA
got new preamp system installed yesterday surely makes a difference

WYDO and WITN are now full signal
Now all stations are locked. This morning I checked my signal on each station and found with the rain the signals were bouncing up and down. Watching TV they still have a good signal.
 

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Top