Craigslist dishes for your perusal

[T4Runner]

Be sure and read the bidding conditions for certification.

 

[Lone Gunman]

If you are also buying the receivers, make sure you plug them in there and verify they still have good unit id's! I got screwed buying one a few years ago with a blanked id due to a dead battery. Only paid $20, but I sure could have used the $20 somewhere else.

I've already got one GI 920 that I'm not using so I don't need any more! I'm only interested in the dish as my systems aren't setup to do servo stuff at this time.

 

[gabshere]

if you make contact , you could pass on the information to the owner to plug the receivers back in so the battery doesn't fail, ruining the receivers
although with the map master thing these type receivers are popular again there is only a small market for them.
cost of shipping these heavy receivers is probably outragious years ago i shipped one for $20-25 recently i shipped several FTA receivers ( light weight compared to these old c-band receivers) cost on shipping those was $22 & $26 ....

 

[gpflepsen]

http://desmoines.craigslist.org/zip/3318992369.html

Des Moines free dish. Looks to be about 8' mesh. Dish is off the pole, linear actuator looks to be there but who knows the condition.

 

[Bongu]

Be sure and read the bidding conditions for certification.

yikes! Didnt notice that. I will stop posting from that site if they all have those conditions. A shame they will likely end up as scrap.

 

[stogie5150]

Tron, pay attention....

http://neworleans.craigslist.org/ele/3254791247.html

 

[Anole]

Tron, pay attention....

http://neworleans.craigslist.org/ele/3254791247.html

Wow, someone can probably name that dish, just from the one picture!

 

[RPB]

Austin and Waco Texas

Austin
http://austin.craigslist.org/zip/3307711290.html
Free to the right person that can remove and haul off.
Must be able to remove stand as well. Stand base probably set in concrete.
Would like to be able to mow without stump sticky out of the ground.

Waco
http://waco.craigslist.org/for/3301356008.html
$100 -large satellite dish (pole not included). If interested it would need to be picked up in person.

 

[toucan-man]

Free - mesh BUD - Lake Jackson, TX

http://houston.craigslist.org/ele/3323225064.html

 

[johann12]

Fortec 180 cm for sale. $60
Lenoir, NC
http://hickory.craigslist.org/ele/3265420206.html
http://hickory.craigslist.org/ele/3265420206.html

 

[toucan-man]

Free - 10' BUD - New Cumberland, PA

http://harrisburg.craigslist.org/zip/3326740857.html

 

[toucan-man]

$250 - 10' mesh - Beech Grove, IN
I don't set the prices, just report 'em
http://indianapolis.craigslist.org/for/3335691840.html

 

[toucan-man]

$175 obo - mesh? BUD - Dillsburg, PA

"Older huge big black satellite dish"

http://harrisburg.craigslist.org/ele/3339297648.html

 

[TreyWingbat]

"Many are using them for great projects like gazebos"... say it ain't so.

 

[toucan-man]

"Many are using them for great projects like gazebos"... say it ain't so.

What's wrong with a gazebo having it's own C-band set-up?

 

[gpflepsen]

An 8'-10' gazebo seems fairly restrictive these days. Expectations must be low.

 

[toucan-man]

Free? - Birdview Perf - Fort Collins, CO

http://fortcollins.craigslist.org/zip/3342770087.html

 

[Anole]

Wow, a Birdview perf!
And just bolted down, too.

Take dish off motor.
Take motor off pole.
Unbolt that unique 6" diameter tube (pole) and away you go.

Give the guy $50 for scrap metal value, and haul it off.
Sounds like he just wants it gone.

 

[toucan-man]

I agree, this one is so EASY. Someone please grab it !

I used to live in Loveland, CO, and were I still there this thing would be home with me by now.

 

[toucan-man]

$150 - mesh BUD - Tampa, FL
a bit pricey
http://tampa.craigslist.org/hil/ele/3343767631.html