Channel signal loss but have signal strength

[whatchel1]

Having a problem w/ a 722. On sat 129 on odd channels all is well. On even channels get a locked but name not acquired on SS screen. The signal level is showing upper 50's to mid 60's. But all the even channels have the "name not acquired!" designation. I've rebooted it to no avail. I also went out and switch the lead from one port of the LNBF to the other port (single dish on the sat).

 

[TheKrell]

I'm not understanding that. Do you mean even transponders?

 

[osumike]

I'm assuming so. Sounds like a bad lnb.

 

[whatchel1]

I'm not understanding that. Do you mean even transponders?

Yes sorry, I'm tired. I'm one of those that mostly sleeps during the morning. I will go to bed here in about an hr after I hoe the garden.

 

[TheKrell]

Assuming this is a 1000.2 LNB and both the TV2 and TV1 inputs have the same problem, and also assuming that 110 and 119 are fine, I agree with osumike. Your LNB failed.

 

[whatchel1]

LNB changed all good now. I was considering that that might be the problem but just wanted to ask as it wasn't light enuff at the time to change out yet. It's nice out now so will head back out and hoe my garden now. It will be hot as hell later today.