I just want to know if we give 18V to two LNB's through a multi-switch irrespective of the receiver's sending voltage do we get proper polarization V or H?
18V to two LNB's
- Thread starter john_robot
- Start date
- Latest activity Latest activity:
- Replies 8
- Views 2K
- Status
Yup you can do this and add Bias T`s to the system....It does make it nice using a laptop power supply ( 20 v ) but really I see no benefit other than using a regular powered multiswitch...Now if you have a large dish farm then this could be a benefit...I was going to go down that road but after seeing that laptop power supply`s will last about a yr or so and then needed replacing I went with 14 powered multiswitch`s..They just work!
Thats just it john _robot?..I would not waist my time trying to juice both lnb`s at 18v..What I am using here for 6 plus yrs on the entire farm is the Zinwell 4803`s...Man they are almost bulletproof and in that timeframe of the 14 in the system I have only had 1 failure......Much more reliable than what you are thinking of doing...I say this as I can only assume you were thinking of a laptop power supply and Bias T`s??
I remember that mod Magic Static....pendragon has been a huge help in so many ways to the FTA world.....21 likes received for him blows my mind.
I'm with him. Used to use power inserters, but the mod is great. Can run C and Ku to 8 receivers with each selecting band and polarity.
- Status
