Search results for query: *

The gist of the problem is the quantity of data required to fully cover every channel and sub-channel in the USA. We here in Lubbock Texas have about 48 channels to keep track of and we are in the median of the pack Larger cities have even more channels and the information on any one channel...

Because the 4K Joeys are 4K but do not support HDR. I think you can record the 4K programming on your Hopper then view it on the 4k Joey as a recording but the 4k Joey cannot tune the 4KHDR channels directly.

I have a Lincoln and a Ford but still get separate billing.

Install Satellite Finder on your phone. Shows where the sats are in the sky.

The only tamper seal on a dish receiver is on the hard drive, so they can't prove you have opened the case as there is no tamper proof seal on the case itself. Go ahead and place the heat sink where it belongs, replace the screws on the case and see if it will boot, what have you got to lose...

Looks like they fixed something that was not broken.

I use my Fire Stick remote to turn the TV and Sony Surround Sound on by a single power button press. The Mrs. uses the dish remote (aux/power/sat/power) to turn on both then to turn it off sat/power/aux/power. If the remote has not been altered since power on/off the first press in each sequence...

Hmmm...I've never heard of a hard reset referring to a factory reset. It's usually just a factory reset.

Celeron Processor :^(

When I open the app it never prompts for a sign in...I'm already signed in.

Can't you attach the hard drive to a linux machine (leaving it physically in the H3, starting the drive with the H3 then disconnecting the data cable and plugging it into the Linux PC) and copy the DISHARC folder to the other drive and move the programs that way? Or is that method used to copy...

My DA login appears to be the same password as MyDish. If I login on the app or on the website, I can go right to DA. It carries my password over and lets me in.

Even a purchased Hopper3 can be exchanged for little or no cost from Dish.

They will not re-up you until the current contract expires - the computer won't let them.

Fleas arguing over a dog.

Everybody seems to need something to worry about!

The rotator has a DC motor in it that is reversible. I haven't used a rotator for 30 years but I've torn the old ones apart to see how they work. They are really very simple. Mine had a cam in the rotator that the motor drove around once for every so many degrees the antenna was turned. That...

I changed my suggestion after re-reading your synopsis - I don't think there is a short of two wires, just a broken one.

It sounds like your cat broke a wire in the cable. There is probably a common wire, a + (clockwise) wire and a - (counter clockwise) wire. The controller energizes whichever wire is needed to turn the rotator motor in the desired direction, if the + wire is broken the rotator will only rotate...

Best practice is to put the pre-amp as close to the antenna as possible.

or a match.

Since it is inside, just twist and solder the wires back together and isolate them with electrical tape - DONE! It doesn't have to be pretty, just so it works.

I'd say, when you paused the IP stream it was paused at the server not on your device.

I have heard, if you record them on your Hopper3, you can play them on the Joey 4K but video may be washed out because of no HDR.

HTTPS://mydish.com/manuals