I have a "owned" VIP722 about four years old. It's in the bedroom and just gets used occasionally. It will work fine for a day or days and if not used, it just shuts down. It's really off because the DVR stops working and there are no LEDs on front panel. To restart it I have to press the power button for 7 seconds, the fan starts up and then it comes alive and stays alive as long as I use it daily.
Firmware is L813rj2bn, in menu option #4, Updates are 3 AM and inactivity is set for 8 hours (and setting it to disabled did not help) I have it connected to the ethernet LAN and a HDMI TV. Test switch shows 119, 118, 110 and 129 all in the green. No OTA connected.
I don't think it is fixable and this post is my last resort before I replace it.
Thanks for reading and any suggestions you may have.
Glenn.
Firmware is L813rj2bn, in menu option #4, Updates are 3 AM and inactivity is set for 8 hours (and setting it to disabled did not help) I have it connected to the ethernet LAN and a HDMI TV. Test switch shows 119, 118, 110 and 129 all in the green. No OTA connected.
I don't think it is fixable and this post is my last resort before I replace it.
Thanks for reading and any suggestions you may have.
Glenn.