Viewsat Xtreme & Ultra G18 123w?

Status
Please reply by conversation.

purenrg

Well-Known SatelliteGuys Member
Original poster
Jan 6, 2008
31
0
Dallas TX
I'm having problems getting a lock on this bird, I'm using the Fta sat-file i got from another fta forum. I have also used other sat-files that had G18 123w in the lineup, but still not getting a lock using any of them.

Just wondering if this is me or is others having this same problem with VS Xtreme & Ultra receivers ?

I'm using a .75 cm P star dish with a Aspen eagle lmb, the setting are standard 10750, I'm not using a motor,I've also used a Invacom QPH-031 with no luck?

Any help would be greatly appreciated!!!
 
Thanks for the reply Lak7, yes I had the Invacom set for the linear side.

I'm using these Tp's 11855 V 3515
11965 V 2000
12113 V 4580
12135 V 2840

So if anyone with a Viewsat xtreme or a Ultra could try to get a lock and post afterwards would be helpful.
 
Last edited:
If you want, you can find the DishNet sat at 119, then you where know where you are.

Forgot to ask, are you using a Motor?
If not, did you properly skew the LNB?
 
I'm in the Dallas Tx area, and yes I did get a lock on 129w circular port w/quality, I can see 123w with a analog squawker meter but no lock/Quality and 125w.

Skew was listed around +34
 
I didn't even realize there was a linear tp on 129w I'll re-scan and try and get it. I'm getting 97w & 83w now so I know that my lnb is working & receiver.
 
But Lak7 posted a frequency for the old G27 which isnt there anymore
Ciel II is DBS and if you're using a KU LNB it wont work ;)
 
I know these receivers are not the best for fta but until I can up grade, I'm just trying to make due. These new fta sat-files were to up grade these receivers for more fta birds, just don't know if it's just me or is it that these new fta sat-files need more work.
 
Status
Please reply by conversation.

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Top