Tuner 3 loses signal on some channels

[megatronky]

Hey guys I'm looking for some help on an issue I've had since I got my Hopper system last year. I'm in the Cayman Islands and I'm looking at the eastern arc, 61.5, 72.7, and 77. Going to a DP44 switch, then to a Solo Node. I've switched all of my cables, but the 3rd tuner loses signal from 61.5, and 77. Has anyone else experienced this issue, or knows how to resolve it?

 

[rglore]

Tuner 3's signal is very high frequency and is stacked above tuner 1 and 2 on the coax. Requires high quality RG6 coax and connectors between the node and the hopper and not too long, so I would check that first.

 

[megatronky]

Tuner 3's signal is very high frequency and is stacked above tuner 1 and 2 on the coax. Requires high quality RG6 coax and connectors between the node and the hopper and not too long, so I would check that first.

I've changed all of the cables and ends about 4 months ago, and there was no improvement. The Node is about 22 to 26 feet away, would that be too far?

 

[joshua.mcglothlen]

I would take the 44 switch out. You have no uae for it

 

[megatronky]

I would take the 44 switch out. You have no uae for it

Remember I'm using 3 separate LNBF, 1 each for 61.5, 72.7, and 77, so I do need a DP44 switch.