trying to get hispasat 1C,or D

[anlrey]

viewsat receiver, 90cm. dish, universal lnb...But dont get good signal, or channels... anyone know the settings,? do I need another lnb, or dish, receiver?? my location is chicago, usa



thanks in advance.

 

[qwert1515]

For your location the dish needs to be:

15.1 ° Elevation
112.8 °Azimuth (Geographic)
43.4 clockwise looking towards the dish ° LNBF polarization tilt (skew)

Not all of the transponders are pointed at America.

What is the model of the LNB you have?

Have you tried any other satellites?

 

[anlrey]

snh invacom single universal lnb

 

[anlrey]

I have tried intelsat 9....got a few channels

 

[qwert1515]

you need to select a LNB setting of 9750/10600.

 

[anlrey]

did that already...only got 50 signal strengh, no channels

 

[qwert1515]

Does the viewsat have a quality indicator, usually receivers have a signal strength and a quality level, the signal level does not matter, even if you connect the receiver to the lnb it will show a signal, quality level is what is important and only shows if you are locked on a transponder.

 

[anlrey]

yes it does....S, is about 50 and Q, is 0....cero

 

[qwert1515]

Until you can get the Quality off of 0 you are not on a satellite with that transponder active, you need to try a different transponder, or you need to adjust your dish.

 

[jpinho86]

Can I Catch The Tv Cabo Feed From The Hispasat 1c/d 30.0w In New Jersey With A 90cm Dish Or Is That Pushing It To The Extreme???

 

[Mr Tony]

TV cabo looks to be a subscription package and the footprint is at Europe, not the US so no you cannot

 

[jpinho86]

thanks iceburg i appreciate that information

 

[jayelem]

 

[elyuri23]

you need to manually put a strong transponder for me it was 11884 V 27500 in order to see any quality signal, and then from there gotta start looking, the dish is going to look like is facing the ground, so have patience.