My favourite channel on G10R has to be the RTN station WNGS 11720 Vertical, Symbol Rate 27690. It is the hardest to adjust for maximum signal as the dish satellite next to G10R causes a lot of interference with this frequency. Once you have peaked the dish for the frequencies mentioned in Iceberg's post, try peaking on WGNS and your other transponders on G10R should not loose any Quality level. Remember that it is Quality level to use to peak your dish, not the signal level. Once you have found G10R make extremely small adjustments. You can not make too small of an adjustment. Once you think you have it adjusted perfectly, (and the bolts are snugged down) try pushing on the dish without loosening the bolts to verify that it is indeed peaked as far as it can be. Push and hold up, then down, left, then right. And as scupmando has mentioned, remember to also skew your LNBF, and peak the skew as well. Also remember, the Invacom SNH-031 is a universal LNBF, so set yor Local Oscillator frequencies to LOW 9750 and HIGH to 10600. You will find that if you do not have a really good meter or a spectrum analizer, that a small TV by the dish is great to have to adjust the dish. Be very carefull if you take a TV, or other electrical equipement outdoors not to shock yourself.