Split signal

[trickydick]

I have a sw44 outside with 2 coax coming in to a dual tuner. Can I split that to run to another dual tuner
Thanks

 

[tjboston5676]

Yep.
Technically you can run 4 dual tuner receuvers. I'm assuming you're referring to a 222 or 722. But with a seperator or triplexor on back of receiver you only need one line instead of two.
But if you want to run two cables from switch to the two inputs on receiver that's fine too. Just more cable and can only have two receivers instead of 4

 

[trickydick]

Thanks Im thinking when you say 222 or 722 your talking about model of receiver. Whats a seperator or triplexor is that something like an sw21. I was thinking I could use that but connect backward

 

[n0qcu]

Yep.
Technically you can run 4 dual tuner receuvers. I'm assuming you're referring to a 222 or 722. But with a seperator or triplexor on back of receiver you only need one line instead of two.
But if you want to run two cables from switch to the two inputs on receiver that's fine too. Just more cable and can only have two receivers instead of 4

If the OP really has a sw 44 it takes two lines for a dual tuner, separators won’t work

 

[tjboston5676]

If the OP really has a sw 44 it takes two lines for a dual tuner, separators won’t work

Yea my bad, I read it quick and was thinking dpp44 switch but it says sw44 and those haven't been used in like 15+ years lol.
So he would just run the two lines from the two available ports and should be good

 

[Tvland1]

Trick post..from trickydick..