I have an 811 used on a Samsung PPM 42S3 Plasma and the 811 remote control does not work well with this tv. When I change the volume on a normal tv, you can hold the volume up button and the volume will continually increase. However, on this tv, when the button is held, the volume only goes up/down one notch at a time. And when tapping the button, it works sporadic. So to increase the volume say 10 notches, it takes about 20 seconds and probably 25 taps.
Anyone with Samsungs not working with the E* remote? It is not a faulty 811 remote because it works fine on all other tvs. And I tried several other E* remotes on this same tv but all have the same problem. But if I use the samsung remote, the volume function works perfect. So it lies in the programming within the remote and hopefully they will fix this in future releases. Just curious because it sucks when you turn the tv on and someone left it real loud and takes 20 seconds to quiet it down. Also sucks because the 811 has some channels considerably louder than others, like HD and SD.
Anyone with Samsungs not working with the E* remote? It is not a faulty 811 remote because it works fine on all other tvs. And I tried several other E* remotes on this same tv but all have the same problem. But if I use the samsung remote, the volume function works perfect. So it lies in the programming within the remote and hopefully they will fix this in future releases. Just curious because it sucks when you turn the tv on and someone left it real loud and takes 20 seconds to quiet it down. Also sucks because the 811 has some channels considerably louder than others, like HD and SD.
