RG 11 Connector Install

[gcd0865]

It looks like a compression-type connector, but I'm not sure what kind of compression tool it will require to secure it in place.

 

[mtnxtreme]

I found out for sure it is a PCT compression type, if you look closely at the fitting you can see 2 rings at the base that actually kinda collapse when you compress it, and make a watertight seal, needing no extra sleeves. The PCT tool was like 60 bucks, pretty average, and it does RG6 also so I got some RG6 connectors for another project. Thanks for all your help!

 

[TheTechGuru]

Here is a good brand of RG11 connector: Digicon PVFC11 RG-11 Outdoor F-Connector (PVFC11) from Solid Signal

Here is a ok brand of RG11 connector: Holland SLC-11 RG-11 Compression Connector (SLC11) from Solid Signal

I've been able to install compression connectors without a compression tool by using two identical channel lock pliers on each side of the connector and squeezing together at the same time.