tomorrow I'm gonna try a MR on w5 @ 105 .... I'll post the tiles
:up:up Great!
tomorrow I'm gonna try a MR on w5 @ 105 .... I'll post the tiles
One problem I see here while doing the MR on w5.... After defaults there is no w5 tile. should I just use w1?
A few months back I did a MR while on W5.
Here is the link.
http://www.satelliteguys.us/4dtv-discussion/221526-channel-mapping-w5-time.html
---------------------------------------------------------------------------
After rebooting the receiver and going to the reset sat limits I then programmed in all the available satellites that were there. They were as follows.
S2 - G6 - S3 – T4 – G7 – X7 – G3 -
T5 – G4 – S4 – W1 – A2 – E2 – M1 –
M2 – G9 – G5 – C3 – G1 – C4 – C1
Since W5 was not on the list I tuned to G9-18 on the 921 receiver since that was on my list of available satellites to choose from.
After a minute or two the 921 received a digital lock on G9-18 and a few minutes later the screen blinked a couple of times. When it did this the receiver no longer was showing G9 but it was now showing (G0).
Channel count from (options- 6-5) after a master rest was 490
------------------------------------------------------------------------------