NorthWest Cable News??

[Transponder]

I tried bigjohn500`s suggestion, G0 05 the DC light flickers on twice then stays off. GB 24 switches to GB 601 with no DC light.
Following Ice`s suggestion, I couldn`t figure out how to change GB to CG but now I know what generics are.
Are there any other sats from which I can get a continuous DC light.

Most of the time if your DC Light is flickering it means your dish is slightly off tune try moving it slightly east or west that should let you get a solid dc light

 

[bigjohn500]

There aren't any maps on W1.

You need to fine tune the sats on which you had the 'flicker'.
Adjust position on arc, a click at a time if possible, and wait at least 30 seconds after each adjustment.
And do the same with the skew. You will get a steady light if you are patient and methodical.

Good Luck and Happy New Year to all!!!

 

[cspiteri]

I tried tvpro`s soft reboot procedure and was not successful. I guess I`m out of options for receiving NorthWest Cable News.
Thanks to all who replied to my request for help/

 

[TheTechGuru]

Works fine right now on my 905.

 

[Mr Tony]

I tried tvpro`s soft reboot procedure and was not successful. I guess I`m out of options for receiving NorthWest Cable News.
Thanks to all who replied to my request for help/

I posted how to use generics....all 4DTV units have them