Hey Guys, I have been doing Direct for 2 years and got offered a job to do Dish. With Dish being a little more complicated I was wondering if anyone knew where I could find a cheat sheet to help me with switches, remote setup, and etc. Thanks 
New Installer to Dish
- Thread starter partspro411
- Start date
- Latest activity Latest activity:
- Replies 16
- Views 3K
DISH "Notwerks" retailler site has installation notes.partspro411 said:Hey Guys, I have been doing Direct for 2 years and got offered a job to do Dish. With Dish being a little more complicated I was wondering if anyone knew where I could find a cheat sheet to help me with switches, remote setup, and etc. Thanks
boba said:DISH "Notwerks" retailler site has installation notes.
good one.
to the origninal poster, this is not a put down in any way, but if you don't know what you are doing, you would not be the only one.
partspro411 said:Hey Guys, I have been doing Direct for 2 years and got offered a job to do Dish. With Dish being a little more complicated I was wondering if anyone knew where I could find a cheat sheet to help me with switches, remote setup, and etc. Thanks
One thing good about Dishnetwork is,, one brand of Dish and One brand of IRD.
322 and 522 could be pain sometime.
DishPro Plus LNB are the best thing that ever happen!!
partspro411 said:Hey Guys, I have been doing Direct for 2 years and got offered a job to do Dish. With Dish being a little more complicated I was wondering if anyone knew where I could find a cheat sheet to help me with switches, remote setup, and etc. Thanks
One thing good about Dishnetwork is,, one brand of Dish and One brand of IRD.
322 and 522 could be pain sometime.
DishPro Plus LNB are the best thing that ever happen!!
If he has access to the retailer website DISH does have information on installation and switches. You are right after 9 years of selling DISH and 20 years of Echosphere I do have some distaste for their poor products.chaddux said:
My 522 couldn't even record the last retailer chat.
Things sure have changed the past couple three years. Retailers would understand more than anyone.
If you would like some practice -- why not come to my house and trench the lines and hide the lines that the previous installer put? Good practice and I would be doing you a huge favor I think
Ok guys any comments about this
--------------------------------------------------------------------------------
Ok guys any comments about this,
Helping a friend installing his dish for dishnet... We did the dish installation but the ird won't ( 2700 ) get the even transporders,and I was running multiswitch was telling me multi... unknown. I did try a 301-10 and like magic was working great,When I ran multi... is just running to 1 and 2 and that it.But I am getting all channels. On the switch results are,
LNB,P-twin
Input 1 2
Sat 119 110
Polarity all all
Device Twin Twin
But when I go back with 2700 the same problem back again
--------------------------------------------------------------------------------
Ok guys any comments about this,
Helping a friend installing his dish for dishnet... We did the dish installation but the ird won't ( 2700 ) get the even transporders,and I was running multiswitch was telling me multi... unknown. I did try a 301-10 and like magic was working great,When I ran multi... is just running to 1 and 2 and that it.But I am getting all channels. On the switch results are,
LNB,P-twin
Input 1 2
Sat 119 110
Polarity all all
Device Twin Twin
But when I go back with 2700 the same problem back again
If I understand your feeble attempt at writing coherent english, you've got a DishPro LNBF and you're trying to use a Legacy receiver.
Where's your Legacy Adapter? I'll bet the proverbial doughnut you don't have one.
Where's your Legacy Adapter? I'll bet the proverbial doughnut you don't have one.
SimpleSimon said:
If you speak spanish will make easier for me.
This is what I get with 301.13
When I do a Check switch with 301.13 I am getting this,
LNB=P= twin
Input= 1 2
Sat = 119 110
Polarity= all all
Device = Twin Twin
But when I go back with 2700 the same problem back again,
No device detect it, just odds transporders and just satellite 119 .
Maybe can you understand better,I am just helping a friend of mine installing his sat.
Thanks in advanced,
Skibby
Ah, yes. Punctuation is good. Nothing to do with English vs. Spanish.
My previous answer definitely applies, and it's the same as the one in your other identical thread.
You need a Legacy Adapter.
My previous answer definitely applies, and it's the same as the one in your other identical thread.
You need a Legacy Adapter.
And then you think I may be able to use this 2700,Don't get me wrong I know I need to improve my english,Do you know when I run check switch with the 301-13 , Will just run 1,2 and that its.
DishPro receivers using DP LNB/switch run up to 5 tests. DP box with Legacy gear runs up to 28 tests give or take.
Legacy box will always run up to 28. Your 2700 should work fine.
Legacy box will always run up to 28. Your 2700 should work fine.
