Need Install Help with 625

[ssgstultz]

I recently purchased a 625 to run off the previous tenants dish that was already installed. THe tenant had Dish Network , but only a standard receiver.

The hook-up currently looks like there are 2 cables from the LNB one coming to receiver and other to a splitter outside. Then, there is a cable going from the receiver and into the same splitter and then into TV2. I am only able to run in single mode and not dual and have shared view enabled to watch the same channel on each TV.

I have read various scenarios for install, but would love to see some pictures if anyone has any of how to hook it correctly and get both TV's working!

Thanks

 

[bross]

Look at the lnb and see it it's a disppro or a dishpro plus and then look at the splitter and see if it's a splitter or dieplexer. A diplexer will have an in/out port on one side and a sat port and vhf/uhf port on the other. The correct hook up will be different depending on which you have.