I think my 622 is dying. Often when I turn it on I get the error ‘No signal on OTA” (obviously saying which channel). If I then go to My Recordings it will show that it is recording that channel and has been for hours. If I go to ‘view’ I get a live picture on the channel that it just said ‘no signal’. I can then stop recording and everything works. Usually, but not always.
As an example. Last night I had it set up to record all three shows on CBS OTA. It didn‘t do NCIS, but did the other two. This has been going on for a couple of weeks now.
Seems to be centered around OTA programming, so would be logical that the OTA tuner is malfunctioning. We use OTA for Networks since we can’t see the EA birds due to trees, unless we add another dish about 75 yards further from the house. Our local HD signals are on EA. Zip is 29376.
The receiver is already 100+ feet from the dish since our house is surrounded by 80-90’ oak trees. Would assume we have two options: replace with a 722K with OTA or go to Hopper, but don’t really need a Joey.
Other suggestions welcome.
As an example. Last night I had it set up to record all three shows on CBS OTA. It didn‘t do NCIS, but did the other two. This has been going on for a couple of weeks now.
Seems to be centered around OTA programming, so would be logical that the OTA tuner is malfunctioning. We use OTA for Networks since we can’t see the EA birds due to trees, unless we add another dish about 75 yards further from the house. Our local HD signals are on EA. Zip is 29376.
The receiver is already 100+ feet from the dish since our house is surrounded by 80-90’ oak trees. Would assume we have two options: replace with a 722K with OTA or go to Hopper, but don’t really need a Joey.
Other suggestions welcome.