I got my upgrade to western arc, from 61.5/110/119 yesterday.. Lo and behold, this tech was able to get 129 !! (2 techs on previous visits for a bad LNB etc., said I had no 129 LOS.
I have 2 - 622 receivers. Weird thing was, after the new dish installed, the 622 receiver downstairs worked fine, but the 622 receiver upstairs when doing a check switch locked onto all 3 satellites, but when it went to the "downloading information screen this may take 5 minutes", it went to the "signal loss" screen. To the 622 that was having the problems, I have RG6 coming from the satellite to the utility closet, and it is then coupled to a RG5?, going up to the upper level that was prewired when the house was built. He checked the signal every which way with a tester, did a hard/soft reboot, and a reboot with no satellites attached, and said everything looked great, could see he was really getting frustrated. Had a rats nest of RG5 in the wall in the utility closet, and he thought maybe one of the wires was pinched, even though never had any problems in the past. Finally he said I am going to swap out your 622 with a new one, but he did one last check switch and it went past the signal loss screen to the downloading guide and everything has been working since yesterday afternoon. Just hope it wasn't the receiver going out, and I will have to pay a fee to swap it out.
Very happy now that I got the western arc where my HD locals are, that I did not have before with my 2 dish setup.