Legacy LNB Straight Into 622?

[izod]

Simple question - Can I run a single legacy LNB straight into the two tuners on a 622? Don't have a meter and I want to see if I can get 129.

 

[webbydude]

You would need two feeds (dual-tuner)....presumably a dual lnb would do the trick.

 

[styxfix]

Be sure to do a switch check after you disconnect from your dish pro LNB and before you do your legacy hook-up. Everything should be empty on your check switch test before you check your line of sight.

 

[izod]

It's not going to be permanent - just to aim the dish, then i'll rinse and repeat with 110 and 119, and move the LNBs from their current dishes. Thank ya!!!

 

[Tom Bombadil]

I know two feeds from a Legacy LNB works fine, I did it.

I once tried to get a 942 to run off of one legacy feed and it protested mightily. But if I remember correctly, I could read the signal strengths. Could be wrong.

 

[SmityWhity]

Just to see if you can get 129, I believe you only need 1 feed, and send it to Sat In 2.