KU Band Transponder gets decent signal but 0 SNR, what can be done to fix it?

[Cham]

I should have included that my readings were from a 90cm dish antenna. A larger dish might yield better results. Here is a scan from 10700-12700MHz:


Lots of low band RF on this bird!

second scan 11700-11900MHz

 

[enb141]

Where are you located Cham?

You don't seem to have any peak at 11800 H

 

[Cham]

I am in Southern Manitoba almost at the Canada/US border.

 

[enb141]

I am in Southern Manitoba almost at the Canada/US border.

So that means that signal of north america is intended for USA or Mexico and not Canada

 

[Brct203]

So that means that signal of north america is intended for USA or Mexico and not Canada

its coverage of Canada is limited to the Southern parts, but it should be ok where Cham is (48 or 49 dBW), not very different from Guatemala (48 to 50 dBW)

 

[enb141]

its coverage of Canada is limited to the Southern parts, but it should be ok where Cham is (48 or 49 dBW), not very different from Guatemala (48 to 50 dBW)

You are right, We got the same power, but I forgot to ask Cham what SR he got, I think that people in the US will get 1000 SR while I'm getting 32720