I am sorry if the information is easily found somewhere on this forum. In a haste I decided to sign up for Direct TV because I believed their banner ad that said 12/31 was the last day to lock in the 29.99 price. I did not do much research before I made this decision. I had Dish Network about 14 years ago but I have been with Comcast Cable for the past 10 years. I am switching from Comcast because they are charging me about $50 per month lease fees to have 4 HD receivers. I am fairly technical but I have not payed any attention to Satellite technology since Dish released their 501 PVR and the first multiswitch.
I selected the new Home Media Center from Direct TV and 3 additional HD receivers for a total of 4 receivers. I am not sure what model my slave receivers will be all it says on my order is HD receiver. I have called Direct TV 4 times now and I can not get anyone helpful on the phone to provide any more detail. They keep telling me that the installer will have all the information I need.
I am concerned about the install which is scheduled for this Friday and was hoping someone could let me know what to expect. Mainly I want to know how may wires I am going to need to have run from the Sat. to the inside of my house. I have a three story house and my distribution room is not on an outside wall so running cables is going to be a difficult task. Currently I have two RG6 Cable runs that extend from the outside of my home into my distribution room. From that distribution room I have a separate Coax cables that runs to each of the 4 TV's that will have a receiver attached. I thought I had read on the forum somewhere that I would have to have four RG-6 runs from the outside of my house to the inside of my home with is going to be very difficult to do. Can someone give me an idea of what the wiring requirements will be for the HMC and 3 additional receivers?
Thanks,
William
I selected the new Home Media Center from Direct TV and 3 additional HD receivers for a total of 4 receivers. I am not sure what model my slave receivers will be all it says on my order is HD receiver. I have called Direct TV 4 times now and I can not get anyone helpful on the phone to provide any more detail. They keep telling me that the installer will have all the information I need.
I am concerned about the install which is scheduled for this Friday and was hoping someone could let me know what to expect. Mainly I want to know how may wires I am going to need to have run from the Sat. to the inside of my house. I have a three story house and my distribution room is not on an outside wall so running cables is going to be a difficult task. Currently I have two RG6 Cable runs that extend from the outside of my home into my distribution room. From that distribution room I have a separate Coax cables that runs to each of the 4 TV's that will have a receiver attached. I thought I had read on the forum somewhere that I would have to have four RG-6 runs from the outside of my house to the inside of my home with is going to be very difficult to do. Can someone give me an idea of what the wiring requirements will be for the HMC and 3 additional receivers?
Thanks,
William