How to slave a receiver

[pitmonkey29]

I have a general instrument receiver and I was wonder how to slave it to my sathawk receiver so I can move my bud

Posted Via The FREE SatelliteGuys Reader App!

 

[mmewrench]

Here is a diagram that should help. The splitters have one leg that passes voltage and one side that blocks it.

 

[pitmonkey29]

I'm thinking of just running c-band does that change the setup any

Posted Via The FREE SatelliteGuys Reader App!

 

[waylew]

I'm thinking of just running c-band does that change the setup any

Posted Via The FREE SatelliteGuys Reader App!

Just ignore the KU parts then.

 

[FaT Air]

Or just run the LNB directly to the FTA. Use H polarity only with the FTA (18v to it then*). Control polarity with the analog. * some LNB's don't work that well with only 13vdc. Or use a power inserter???

 

[beavs2112]

Just ignore the KU parts then.

If the OP doesn't want ku then he doesn't need the diseq switch in the diagram above either. It's job is to switch between c & ku. If there's no ku then no need for a switch.

 

[beavs2112]

I'm thinking of just running c-band does that change the setup any

Posted Via The FREE SatelliteGuys Reader App!

hi pitmonkey29. so are you thinking of not using the ku system you already have? (i looked at some of your previous posts and you mentioned you already have a ku system) Or are you trying to combine the c & ku systems into one receiver? (the sathawk)

 

[pitmonkey29]

I wanna just set up the C band for now

Posted Via The FREE SatelliteGuys Reader App!