Hopper Power on question with 54 remote.

[KAB]

Just started using 54 remote after I broke my Harmony. It's set to turn on my soundbar, as well. Problem is, when the Hopper sarts, there is no sound from soundbar. Then, a graphic like a power plug comes on bottom right saying to press any button to watch TV or Hopper will go into standby. When I press the button, the sound comes on. How do I stop this? I have yet to find anything in settings, tried the obvious power and remote choices. At a loss. Gonna have to fix my Harmony!!!

 

[Bobby]

With your 54 remote press Home twice, go to and press Remote Control, go down to Limited Mode and turn it off.

 

[KAB]

With your 54 remote press Home twice, go to and press Remote Control, go down to Limited Mode and turn it off.

It already is. Re-read my OP. Not the same issue.

 

[Bobby]

It already is. Re-read my OP.

Your OP didn’t mention Limited Mode specifically. I tested this with my own setup. My LM was set to off. I turned it on and got your issue. I turned it off and the issue went away. Maybe try to turn it on, shut things down and then turn it back off.

 

[KAB]

Your OP didn’t mention Limited Mode specifically. I tested this with my own setup. My LM was set to off. I turned it on and got your issue. I turned it off and the issue went away. Maybe try to turn it on, shut things down and then turn it back off.

Done, rinsed and repeat. Keeps coming back. Even with a power pull.

 

[Bobby]

Done, rinsed and repeat. Keeps coming back. Even with a power pull.

Maybe one of our other tech types will have an answer.

 

[HipKat]

It already is. Re-read my OP. Not the same issue.

You're Powering your TV back on within 5 minutes of powering off. The graphic you see is the Hopper telling you it will be going into standby mode. I demonstrate this to customers so they know it when they see it. There is no setting to prevent it.

 

[KAB]

You're Powering your TV back on within 5 minutes of powering off. The graphic you see is the Hopper telling you it will be going into standby mode. I demonstrate this to customers so they know it when they see it. There is no setting to prevent it.

No, I'm turning it on about 20 hrs after I last turned it off.

 

[HipKat]

No, I'm turning it on about 20 hrs after I last turned it off.

Well either your Hopper isn't powering down or you hitting power Twice or it's sending two signals because that is definitely the popup for waiting to go into Standby mode

 

[Bobby]

Well either your Hopper isn't powering down or you hitting power Twice or it's sending two signals because that is definitely the popup for waiting to go into Standby mode

I think what he is seeing is not the usual standby slate. KAB, can you take a picture of the screen with your issue.

 

[KAB]

I think what he is seeing is not the usual standby slate. KAB, can you take a picture of the screen with your issue.

Will tomorrow night if I think of it.

 

[Bobby]

Will tomorrow night if I think of it.

I’ve got a picture of it. You won’t need to take one.

 

[Bobby]

This is the normal slate when in standby:

This is what KAB is seeing: