Hopper 3 385 update

[millerthyme59]

Just downloaded and installed H385. All good so far.

Sent from my SM-X210 using Tapatalk

 

[Jim5506]

Did anyone ever see an H384?

I had to prompt it three times to manually do the update.

It is finally getting the green progress bar.

We'll see what I get.

 

[Pepper]

Still has the bug with remote "Press the SAT button" notifications showing when turned off.

 

[ekilgus]

Just downloaded and installed H385. All good so far.

Sent from my SM-X210 using Tapatalk

Not to worry, I'm pretty sure H386 will fix the problems you find.

 

[Jon J]

New stuff?

 

[navychop]

No holosuite.

Yet.

 

[dweber]

Manually updated both of my Hopper 3 receivers to H385 and my Joey 3 to J585. Have not noticed any problems.


Sent from my iPhone using Tapatalk

 

[n0qcu]

They still haven't fixed the problem of being unable to delete recordings. It wants me to press the blue button and there is no blue button on the 54 remote. The blue button doesn't work on the 40 remote either.

 

[Almighty1]

Just forced updated about 5 hours ago on the Hopper H3 on H383 to H385 with Hopper Plus on P13106 to P13112.

It appears that the current version(s) of DISH equipment on AndroidTV software are as follows:
Joey4 P53112
Wireless Joey4 P63112
Hopper Plus P13112

Josh.M and brittanygarden

Have the same issue as mentioned with H383 and earlier after updating.
The bar chart shows the DVR % is visible which for me is 100% even though there is 120GB of free space left on the internal HDD.

The issue of skipping to the beginning and end appears to be fixed from brief testing.

So still the three major issues:

Issue #1
H385 still has the issue where 119GB-120GB free is considered 100% full on the HDD so the last 119GB-120GB can't be used at all. The fix is either make it available with the correct % remaining or treat the HDD as 120GB less in capacity so the % meter for what's used is correct.

Issue #2
H381, H382, H383, and H385 has the issue where the Remote Control Mode Reminder Notification Mode Reminder Notification is always on where it will display that the remote needs to be in SAT mode when on TV and AUX even when Settings -> Notifications -> Remote Control Mode Reminder is set to Off. This was originally discovered by Pepper.

Issue #3
H383 and H385 and possibly earlier version(s) I may not be aware of has this issue where randomly, as we all know there is the 1 hour buffer on the current channel but let's assume the current time is a new program which was on for 10 minutes, it will not allow rewinding past the start of the current program as the buffer would be gone for anything before that part so one can only rewind back the the beginning of the current program and not the previous program. I believe what RTCDude mentioned in Hopper 1 Software H183, Hopper 2 Software H283, Hopper 3 Software H383, Hopper Duo Software H483 and Hopper Plus Software P13106 released & available might be related.

 

[charlesrshell]

Just forced updated about 5 hours ago on the Hopper H3 on H383 to H385 with Hopper Plus on P13106 to P13112.

It appears that the current version(s) of DISH equipment on AndroidTV software are as follows:
Joey4 P53112
Wireless Joey4 P63112
Hopper Plus P13112

Josh.M and brittanygarden

Have the same issue as mentioned with H383 and earlier after updating.
The bar chart shows the DVR % is visible which for me is 100% even though there is 120GB of free space left on the internal HDD.

The issue of skipping to the beginning and end appears to be fixed from brief testing.

So still the three major issues:

Issue #1
H385 still has the issue where 119GB-120GB free is considered 100% full on the HDD so the last 119GB-120GB can't be used at all. The fix is either make it available with the correct % remaining or treat the HDD as 120GB less in capacity so the % meter for what's used is correct.

Issue #2
H381, H382, H383, and H385 has the issue where the Remote Control Mode Reminder Notification Mode Reminder Notification is always on where it will display that the remote needs to be in SAT mode when on TV and AUX even when Settings -> Notifications -> Remote Control Mode Reminder is set to Off. This was originally discovered by Pepper.

Issue #3
H383 and H385 and possibly earlier version(s) I may not be aware of has this issue where randomly, as we all know there is the 1 hour buffer on the current channel but let's assume the current time is a new program which was on for 10 minutes, it will not allow rewinding past the start of the current program as the buffer would be gone for anything before that part so one can only rewind back the the beginning of the current program and not the previous program. I believe what RTCDude mentioned in Hopper 1 Software H183, Hopper 2 Software H283, Hopper 3 Software H383, Hopper Duo Software H483 and Hopper Plus Software P13106 released & available might be related.

Also, to add is the black screen upon H+ and J4 startup. Is Dish going to ever fix this issue?

 

[Almighty1]

Josh.M and bri

Also, to add is the black screen upon H+ and J4 startup. Is Dish going to ever fix this issue?

Josh.M and brittanygarden

It seems like there are still problems with playback in H385 as mentioned at Hopper 3 skipping a dvr show issues as I tried to skip, it went all the way to the beginning of the buffer.

 

[tjboston5676]

They still haven't fixed the problem of being unable to delete recordings. It wants me to press the blue button and there is no blue button on the 54 remote. The blue button doesn't work on the 40 remote either.

Have you tried pressing recall?

 

[n0qcu]

Have you tried pressing recall?

Yes that doesn't work either.

 

[riderj]

Yes that doesn't work either.

I remember back a year-and-a-half ago, we didn't have all these issues - What Has Happened?

 

[Almighty1]

I remember back a year-and-a-half ago, we didn't have all these issues - What Has Happened?

I think it as because versions after H350 (can't remember) uses a newer video player?

 

[Almighty1]

Josh.M and brittanygarden

It seems like there are still problems with playback in H385 as mentioned at Hopper 3 skipping a dvr show issues as I tried to skip, it went all the way to the beginning of the buffer.

Josh.M and brittanygarden

What I noticed is interesting is that I never change the channel and the box is always on so assuming it's already 5PM or 6PM, the nightly reboot is at 1AM but the buffer seems to start at 3:01AM which is 14Hr-15Hrs earlier as I always thought the buffer is supposed to be only 1 hour at the maximum so even when you rewind to the beginning, it seems to fit the content of the 1 hour on that entire yellow bar from 3:01AM to 5PM. So it seems that unless the program I am trying to watch has not finished, I couldn't get back to the previous program if a new show has already started.