H3 - H387

[LQQK]

My H3 updated to H387 when I turned it on this morning. It took over an hour to do its thing. I've never had such a slow update.

 

[jannah]

I just checked and my H3 updated to 387 today at 4:49 AM. I don't know how long it took.

I never got H386.

Edit to add, Joey2 is at J285.

 

[ekilgus]

Is it my imagination, or are these updates coming with greater frequency?

 

[HipKat]

Is it my imagination, or are these updates coming with greater frequency?

Sometimes it is that way, it seems. There will be a rash of rapid fire updates, and then nothing for a spell.

 

[Pepper]

Depends how many tries it takes to get whatever the new thing is working, then they can start trying to fix whatever got broken when they made the new thing.
(source: was a programmer for many years)

 

[Pepper]

Just checked. As expected, all my bugs are still there. I guess I feel special.

Post in thread 'Hopper 3 385 update '

Dec 4, 2024

Got H386 today!

And every bug I reported since H381 is still there! Yay, I guess.

brittanygarden Josh.M can we get these reported to the developers please?

• Pepper

• 

 

[Almighty1]

Josh.M and brittanygarden

Just forced updated 3 days agp on the Hopper H3 on H386 to H387 with Hopper Plus on P13113.

It appears that the current version(s) of DISH equipment on AndroidTV software are as follows:
Joey4 P53113
Wireless Joey4 P63113
Hopper Plus P13113

Have the same issue(s) in H387 as mentioned with H386 and earlier after updating.

So there are still six major issues:
1) The bar chart shows the DVR % is visible which for me is 100% even though there is 120GB of free space left on the internal HDD. H386 still has the issue where 119GB-120GB free is considered 100% full on the HDD so the last 119GB-120GB can't be used at all. The fix is either make it available with the correct % remaining or treat the HDD as 120GB less in capacity so the % meter for what's used is correct.

2) The issue of skipping all the way to the beginning and end of the buffer and not anything between the beginning and end appears to not be fixed as it still does happen.

3) As seen in the photo below, we all know the buffers are 1 hour but as seen in the photo, the buffer appears to start from the point of when the Hopper started buffering the channel since it is 23 hours per the photo so the length of the buffer is wrong as well as the start time on the left which should never exceed 1hour or 60 minutes.

4) Another issue using the photo above as a example is that sometimes the video will freeze when either rewinding, forwarding, replaying, skipping and then what eventually happens is using the above photo for example, it will lost the entire buffer even though the 1:30AM to 12:30AM bar is there but the yellow will be empty except from the time when the live buffer shows video after unfreezing, basically it's similar to someone just changing to that channel except the bar will still show the 23 hours but without the yellow before the current buffering.

5) H383, H385, H386 and possibly earlier version(s) I may not be aware of has this issue where randomly, as we all know there is the 1 hour buffer on the current channel but let's assume the current time is a new program which was on for 10 minutes, it will not allow rewinding past the start of the current program as the buffer would be gone for anything before that part so one can only rewind back to the beginning of the current program and not the previous program even though the Hopper 3 was always tuned to the channel for the entire 1 hour or 60 minutes and ofcourse the bar would still appear like the photo above except the yellow would start from the time of the start of the current program and nothing before that.

6) H381, H382, H383, H385, H386 has the issue where the Remote Control Mode Reminder Notification is always on where it will display that the remote needs to be in SAT mode when on TV and AUX even when Settings -> Notifications -> Remote Control Mode Reminder is set to Off. This was originally discovered by Pepper.

As Pepper said, we would all appreciate it if these issue(s) would get reported to the developers and engineering.