I'm still setting this up. I have the M-2 package from Sadoun only with the 100cm dish upgrade. I have a few sats. programed but I can't get it to GO TO or MOVE more than a few degrees at a time using USALS or DiSEqC. My dish is only 50' away. I don't think the cable is bad but I'm going to try it closer to the dish tomorrow. I'll take any other suggestions if this doesn't work. Thanks.
Fortec newbie
- Thread starter draggon_9
- Start date
- Latest activity Latest activity:
- Replies 1
- Views 1K
- Status
50 feet should be no trouble at all, some members here have 200 feet or more.
You might check the fittings on the cable, also be sure to use RG-6 cable, not RG-59.
You might check the fittings on the cable, also be sure to use RG-6 cable, not RG-59.
- Status
Similar threads
