Florida Channels??

[LoTech]

Anybody get the Florida Channel or Florida Knowledge Channel on 87W? Lyngsat lists it as DVB-S2 8PSK.

I haven't been able to scan it in on my Coolsat 8000. I get OETA fine on 125, but maybe my dish is too small for this one.

 

[Jim S.]

I last got them a month or so ago on a 39" dish. They're really marginal, unless I do way more tweaking than I need to do for any other channel, including other S2 channels. I suspect they're still there, I'm just not aimed well enough.

 

[photoman76]

They are still there. Coming in fine on my 90 cm Fortec dish in Northern California.

 

[Hindu55]

Was just there a while ago. They are coming in fine on my 90 cm also. Just to note,
I've only had an occasional sputter of signal on my 76 cm.

 

[LoTech]

Thanks, guys. I don't think I'll bother adjusting the dish just to get these.

 

[Jim S.]

This morning I scanned in Florida Knowledge at 12061V and Florida Channel at 12065V (same SRs as before). But now, I have no trace of a signal on those two TPs, and the usual barely-usable signal on the original ones. Since everything else scanned at the normal frequencies, I have no idea what's going on.

 

[photoman76]

I see them at 12045 V and 12050 V. I see nothing at the other frequencies.

 

[1inabillion]

Working fine on my setup.

FKN 12044 & FL Ch 12050