Dual Standard LNBF

[Gary Z]

Just wanted to ask a question about this LNBF. What I want to do is setup a dish to AMC9 RTN. I believe with this LNB I can run two receivers on different polarities without the use of a 22kHz or DiSEqC switch? Just run a separate cable to each receiver from each of the outputs??

Link Below---
Gloyrstar.tv - Glorystar Satellite Systems - Free Christian Television - No Monthly Fees!

 

[Anole]

yes

That will do it!

 

[Gary Z]

That will do it!

Thanks Anole I thought it would but I wanted to make 100% sure before I bought one.

 

[Anole]

Linuxman got a dozen or two for his big Ku project.
Scroll through the thread (if you don't have time to read it) and look at the pictures.
I've been chatting privately with him, and haven't heard a bad word about 'em!

As in his install, you could add a 2x4 multiswitch to your one LNB and then hook up to four independent receivers.
Or, you could tip-toe through our Switches Simplified FAQ, and get ideas on how to connect this one new LNB up with all the rest you have, in a big network.
If you can imagine it, we can help you make it real.
.. or die trying...