DPP44 needed with EA 1000.4 and 118.7 for 2 hopper system?

[rjruby]

I presently have an EA 1000.4 dish with a 118.7 wing dish connected to the LBNin on the 1000.4.

If I install a two Hopper system, can I just run the 3 cables from the 1000.4 to the Duo Node to get all 4 satellites or do I have to install a DPP44 and run the 4 cables to it (3 from the 1000.4 and the 118.7)?

Thanks,

Bob

 

[lucky86]

I presently have an EA 1000.4 dish with a 118.7 wing dish connected to the LBNin on the 1000.4.

If I install a two Hopper system, can I just run the 3 cables from the 1000.4 to the Duo Node to get all 4 satellites or do I have to install a DPP44 and run the 4 cables to it (3 from the 1000.4 and the 118.7)?

Thanks,

Bob

I have three lines from my dish directly to my duo node.

 

[rjruby]

I have three lines from my dish directly to my duo node.

How many satellites are you picking up with your system?

 

[lucky86]

110,119,129. Do you currently have a separate line for 118 or is it combined at the lnb?

 

[rjruby]

A cable connects the 118.7 LNB dish to the LNB In port on the 1000.4 LNB.

The 3 output ports of the 1000.4 LNB run to my 3 receivers (622, 211, 211k)

I pick up 4 satellites 61.5, 72, 77 and 118.7.

 

[lucky86]

A cable connects the 118.7 LNB dish to the LNB In port on the 1000.4 LNB.

The 3 output ports of the 1000.4 LNB run to my 3 receivers (622, 211, 211k)

I pick up 4 satellites 61.5, 72, 77 and 118.7.

Yeah so just feed those lines to the node, no need for a switch because each of the three lines is out putting all four sats.

 

[rjruby]

Thanks. That's all I needed to know.