diseqc switch ?

[joem919]

ok i have the invacom0.3db lnbf,
my question how do i set this settings
for l n r and h n v .
I have the diseqc 4 n 1 switch .
thanks for any one who responds on this and their help

 

[Anole]

There is a thread in the FAQ section concerning use of diseqc switches.
Many examples are shown. Does that help?


There are two common Invacom LNBs we use.
- the SNH-031 is Universal and linear only
- the QPH-031 is Standard and linear, AND ALSO Circular with a different LO
links above take you to the Invacom site, where you can find PDF documents for each LNB.

Basically, the QPH is Standard; LO= 10.750, and on the other port Circular; LO= 11.250

The SNH is Universal, with dual LO of 9.750 for low band with 22khz off, and 10.60 high band with 22khz on.