Comments from a newbie to FTA

[comfortably_numb]

Directv uses its own format for the stations. Not DVB or DVB-S2. So that's why they won't log a signal on your receiver

So these mystery signals aren't Directv then?

 

[Titanium]

They are DirecTV transponders. The STB detects and is logging the TPs, but is unable to decode the transport streams as they are not DVB compatible.

 

[comfortably_numb]

I ordered a Maverick PLL LNB. I'm anxious to see if WPR will lock more reliably.

 

[k4otl]

This V9 Prime receiver is great, but I can't figure out why it's scanning feeds out of range like all these H 19999 feeds. k4otl does your unit do this?

View attachment 179045

Yes I get similar TPs scanning in, I just figured they were data and thought nothing of it. I use a Geosatpro Standard PLL LNB on 99W and 101W, which is what locks WPR. Additional news, I manually entered in the "Liberty" mux that's SR 370, it's a bit more reliable, probably a function of being closer to the nearest 1 Mhz.

 

[k4otl]

The other thing I wonder about with this box is it's data usage.. it uploaded 27MB of data somewhere earlier today. Where? What is it uploading? For now, I've disconnected it from the internet.

View attachment 179046

Glad you like it! I got an Amiko Mini 4K in the mail this week and I think the v9 wins the cake, definitely better remote. I need to get used to the Amiko but I switched back for now. As far as data usage, idk, I don't have it connected to the internet (not much in my house is), looks like I won't ever if that's the case. Maybe it's "calling home"?

 

[comfortably_numb]

Maybe it's "calling home"?

Yep, to China. I just worry what the message is

 

[k4otl]

Yep, to China. I just worry what the message is

"The Globalist elite is collapsing, now buy some male supplements"

 

[Hyper Casey]

When it comes to low symbol rates and narrow signals the accuracy of the LNBF is the name of the game. Check out this thread where a member tested several LNB models including the Maverick, a Geosatpro, and more. And the LNBF that performed the best was the Edision Sl-2

B

Thread 'Edision SL-2 LNBF - review'

Jan 15, 2023

As you may remember, Michael (KE4EST) and Casey (from HyperMegaSat) recently ran a giveaway contest, and the prize was an Edision LNBF. The contest came with a catch: the winner had to commit to writing a review of the LNBF. I was the lucky winner, so now is the time to uphold my end of the deal, and here is my review of the LNBF.

I think we are all familiar with Edision as a brand of great Enigma2 receivers, but it appears they also make LNBFs (and many other things, actually).

The Edision SL-2 is a universal, single-output LNBF. It has the usual 9750 and 10600 LO frequencies, selected...

• Brct203
• Replies: 25
• Forum: FTA Equipment Reviews

• 

 

[freddylq]

I ordered a Maverick PLL LNB. I'm anxious to see if WPR will lock more reliably.

Here's a stupid question. I just replaced the Edison with my old GeoSat PLL Standard, what's the LNB Freq ?

 

[freddylq]

Here's a stupid question. I just replaced the Edison with my old GeoSat PLL Standard, what's the LNB Freq ?

Nevermind, I had it set to 10750 (as it should be) but the markings on the housing are so deteriorated that they are hard to read. Need to adjust it. I'm on G16 and the only TP I'm able to get (signal comes in & out) 12096 (InfoWars).

 

[freddylq]

Nevermind, I had it set to 10750 (as it should be) but the markings on the housing are so deteriorated that they are hard to read. Need to adjust it. I'm on G16 and the only TP I'm able to get (signal comes in & out) 12096 (InfoWars).

I'm back in business

 

[mikekohl]

I'm just going by Lyngsat. They appear to be circular tps on a similar frequency mapping as the Dish tps on other satellites. Not unbelievable that strong pay TV signals are bleeding over from 101W to 99W. All encrypted (Videoguard) of course. Maybe don't lock since they are too weak.

Here's what I see looking at 101W using a circular LNB. I'm not sure why I can't lock.

View attachment 179048

I have used a 10750 MHz local oscillator setting with a conventional Ku-band LNBF, and it can quite often receive the lower end of the DBS frequencies (12224 upwards) in a blind scan. Unless in the first part of your above pictured scan, you used 10750 on a regular Ku-band LNBF to scan the first 20 channels, and then connected a DBS LNBF with 11250 local oscillator to then scan 12443 frequency in a second scan.

 

[cyberham]

I have used a 10750 MHz local oscillator setting with a conventional Ku-band LNBF, and it can quite often receive the lower end of the DBS frequencies (12224 upwards) in a blind scan. Unless in the first part of your above pictured scan, you used 10750 on a regular Ku-band LNBF to scan the first 20 channels, and then connected a DBS LNBF with 11250 local oscillator to then scan 12443 frequency in a second scan.

I have an Invacom QPH-031. So I can scan linear or circular tps using the same dish. I use Port 1 on the linear side of the LNB most of the time. But if I switch over to Port 2 then I can scan circular tps. Channels 1 - 20 above were scanned in on previous scans using the linear side.

 

[comfortably_numb]

Unless in the first part of your above pictured scan

Just using the regular 10600 universal LNB settings with 22 Khz tone locked on.

 

[freddylq]

I ordered a Maverick PLL LNB. I'm anxious to see if WPR will lock more reliably.

Just curious as to why this particular LNB ?

 

[N6BY]

Yep, to China. I just worry what the message is

I replaced my dead Edision OS Mio with an Octagon SF8008. After I ordered it I found out that it uses a Hauwei SOC and had instant buyer's remorse. Hauwei is not a trusted Chinese company. Needless to say, I have not let it connect to the internet.

I could put my network tap (a hardware device) on it to watch when it phones home to China, but decided not to bother.

Anyone want to buy an Octagon SF8008 with only a few hours of use?