sheridan said:The problem with this setup is that both tv sets see the same channel, which is controlled by the sat receiver. However, if that's what you want, then there is no problem. What you will want to do then, in order to control the H10 from the other room is setup a remote repeater. The receiver (for the IR commands) goes in the second room and the transmitter (or repeater) is placed near the H10.
If however, you wanted to watch a DIFFERENT channel than is on the tv in the primary room, then an additional receiver with cabling is required.
Wait a minute guys,
Why can't he just set up the current remote control to RF and use the remote from either room, he already mentioned that having the same channel on is not a problem, why waist money on a repeater.
I used A/V cords (R/W , Y) to run mine.
Jimbo