Hello,
It's been many years since I posted on these forums, but last time I did you were a tremendous help. I have a Birdog V2.5 that I purchased from ebay. It works fine, but lacks the satellites I need as I am a C band and KU band Satellite tech. I did not have the proper cable so I attempted to use a Console cable which did not work. It did reset the meter and require me to recharge it. I then ordered the proper cable and attempted to install the satellites in the meter and was unable. I get message Error: Ack not received. I have contacted the vendor who gave me a pinout that I have verified up to and including building my own cable. I still get the same message. I cannot send for service as they no longer support this model. According to them, it appears I may need a new RS232 interface. I have been unsuccessful at locating parts or any other repair centers for my birdog. Any help would be appreciated.
John
It's been many years since I posted on these forums, but last time I did you were a tremendous help. I have a Birdog V2.5 that I purchased from ebay. It works fine, but lacks the satellites I need as I am a C band and KU band Satellite tech. I did not have the proper cable so I attempted to use a Console cable which did not work. It did reset the meter and require me to recharge it. I then ordered the proper cable and attempted to install the satellites in the meter and was unable. I get message Error: Ack not received. I have contacted the vendor who gave me a pinout that I have verified up to and including building my own cable. I still get the same message. I cannot send for service as they no longer support this model. According to them, it appears I may need a new RS232 interface. I have been unsuccessful at locating parts or any other repair centers for my birdog. Any help would be appreciated.
John